[INFOGRAPHIC] How to Select the Right Pallet Rack for your Warehouse

Share on facebook
Share on twitter
Share on linkedin
Share on pinterest
Share on reddit
Share on email
Share on print

Warehouse management is an industry that is growing every year. As this continues to occur, the daily demands of the workforce inside the warehouse increase as well. Supplies and inventory are two of these factors that increase consistently. As these numbers begin to rise, you will need a method of efficiency to properly house your products. Shelving and pallet racks come in all shapes and sizes and allow warehouse and logistics managers the flexibility they need to store items effectively.

Pallet rack shelving is a common feature in warehouses, and when selecting pallet racks, you should be certain you follow proper procedures for measurements and calculations. To make sure you have the correct size, you will need to take measurements of available space and construct a layout based on where you plan to place the shelving. It is important to check the accessibility and ensure forklifts can maneuver around the shelving and enough space is available for aisle width and ceiling height.

Steps to Picking the Right Pallet Rack

  1. Determine the size of your pallet to be stored.
  2. Determine the overall load W x D x H.
    • For the overall height, add the load and pallet heights together.
    • Example: load height 42″ + pallet height 6″ = 48″ overall height. Overall load: 42″W x 48″D x 48″H.
  3. Beam Width.
    • Determine the width of your pallet/load and allow a minimum of 4″ between the upright frame and the load and a minimum of 4″ between loads.
    • Example: to store (2) 42″W loads. 4 + 42 + 4 + 42 + 4 = 96″ wide beam
  4. Beam Capacity.
    • Multiply the weight of the pallet and load by the number of pallets per level.
    • Example: two pallets with a weight of 2500 lbs. each per level. 2500 lbs x 2 pallets per level = 5000 lb. beam capacity minimum requirement.
  5. Upright Depth.
    • The depth of the upright frames should be your pallet depth (48″) minutes (6″) (3″ overhang in the front and 3″ overhang in the back).
    • Example: 48″ – 6″ = 42″ deep upright.
  6. Upright Height.
    • Determine the overall load height. Add a minimum of 6″ clearance between top of load and next level of beams. Add the beam heigh and multiply by the amount of upper levels required (do not count floor level).
    • Example (4 shelf levels): 48″H + 6″ (for clearance) + 5″ (beam height) = 59″. 3 upper levels x 59 = 177″ high upright.

Infographic: Visual Steps to Pick the Right Pallet Rack for Your Warehouse

In the infographic that follows from Speedrackwest.com, you will find all of the details needed to make an informative decision when it comes to choosing that right kind of shelving system to meet your needs.

How-To-Select-The-Right-Pallet-Rack-For-Your-Warehouse infographic

Inbound and Vendor Freight Management

Stay in control of all shipments, including inbound and vendor freight.

Less-Than-Truckload Management

We’ll help you find the right carrier to help you stay on time and budget.

Cerasis Rater - TMS

Manage your Inbound and Outbound OTR freight shipping needs and data.

In January 2020, Cerasis was acquired by GlobalTranz, a leading technology and multimodal 3PL solutions provider. To learn more, please read the press release. If you are a current or prospective Cerasis customer, we invite you to reach out to us to learn how our combined capabilities can deliver new services, solutions and enhanced value to your supply chain. To learn more about GlobalTranz, please visit www.globaltranz.com.

Join 30,000 Plus Subscribers!

To subscribe to our blog, enter your email address below and stay on top of things. We'll email you with a confirmation of your subscription.


Send this to friend